magyarDardi DWJ2040 Flying Arm Water Jet CNC Cutter Machine
Technical Specification
| Product | |
| Brand | Dardi |
| Model | DWJ 2040 |
| Product type | Water Jet (Abrasive Jet) CNC Cutter Machine |
| Structure | |
| Structure | Flying Arm (Cantilever) |
| Table Size | |
| X-axis | 2100 mm |
| Y-axis | 4100 mm |
| Travel | |
| X-axis | 2000 mm |
| Y-axis | 4000 mm |
| Z-axis | 130 mm |
| Operation | |
| CNC Controller System | Fagor (Spain) 8035/8040 |
| Motor and servo | Yaskawa (Japan) AC motor and drive |
| Repeatability accuracy | +/- 0.025mm |
| Cutting accuracy | +/- 0.1mm |
| Power Supply | 380 VAC, 50 Hz, 3 Phases |
Features:
- Motorized Z Axis
- Integration cast supporter, easy to replace
Configuration
- Dardi Water Jet DWJFB-2040 CNC
Working area X,Y,Z = 2000 x 4000 x 130 mm
Motor and servo: YASKAWA - DPSC7-3740 High Pressure Pump
Max. output pressure: 400 MPa (60 000 psi) - DWCH ON/OFF Valve
- DCAS-B Abrasive Controlling Valve System
DPSC7-3740 High Pressure Pump
| Product | |
| Brand | Dardi |
| Model | DPSC7-3740 |
| Product type | High Pressure Water Pump |
| Operation | |
| Max. output pressure | 400 MPa (60 000 psi) |
| Intensifier ratio | 20:1 |
| Max. flow rate | 3.7 l/min |
| Inlet water pressure | 0.4 MPa |
| Main motor power | 37 kW (50 HP) |
| Power supply | 380 VAC, 50 Hz, 3 Phases |
| Dimensions | |
| Size (L x W x H) | 1700 mm x 1500 mm x 1400 mm |
| Weight | 1300 kg |
Features:
- Self-diagnostic function provides a safe operating environment and convenient maintenance
- Inlet water serial filters (5 micron, 1 micron, 0.45 micron in series)
- Arbitrarily, manually adjustable working pressure (can be set to any value by hand)
- Automatically quits on the condition of super pressure or lack of required pressure
DSP7 Abrasive cutting head
- Max orifice size: 0.25 mm
- Max nozzle: 1.0 mm
- Automatically adjusts the orifice and nozzle in one centre line to guarantee cutting efficiency
DWCH ON/OFF Valve
- Air-driving valve with a function of the instant on/off the hi-pressure water
- Automatic control over the on/off high-pressure water can be achieved by CNC M function
- The pressure when the valve is off can be arbitrarily adjusted - to achieve the perforating with a lower pressure
DCAS-B Abrasive controlling valve system
- Self-absorbed abrasive delivery
- Fill abrasive to hopper by hand
Software
PEPS CAD/CAM suite
- DXF files can be automatically loaded by the CNC program
- Communication between PC and CNC goes through serial interface
- An open database to save the cutting parameters of different materials. There is no need to enter the parameters again and again - you can use them in your CNC programs with a mouse click.
DAADS-C abrasive feeder
- Automatic delivery of the abrasive into the hopper
- Highly sensitive sensor; automatic notice to operator about when to fill the abrasive
- 250 kg storage capacity
Accessories
- Spare parts: Orifice (3 pieces), Spare kits (ON/OFF Valve), Safety valve, Lubricant
- Special tools
- Technical documentation
Support
- Installation
- Training at customer's facilities